abel ... galasmund dann geht es drum speicherbausteine usw. zu machen. so jetzt weiter. trotzdem erst diese zufallszahlen und das ganze ding.
(C) David Vajda Sun Aug 30 19:25:20 2026 4 Network - TTL - Disjunktive Normalform 1 0 0 0 1 1 3 0 0 1 1 1 7 0 1 1 1 1 8 1 0 0 0 1 9 1 0 0 1 1 10 1 0 1 0 1 11 1 0 1 1 1 12 1 1 0 0 1 13 1 1 0 1 1 Gruppe 1: 1 0 0 0 1 1 8 1 0 0 0 1 Gruppe 2: 3 0 0 1 1 1 9 1 0 0 1 1 10 1 0 1 0 1 12 1 1 0 0 1 Gruppe 3: 7 0 1 1 1 1 11 1 0 1 1 1 13 1 1 0 1 1 1:3 0 0 - 1 1:8 - 0 0 1 8:9 1 0 0 - 8:10 1 0 - 0 8:12 1 - 0 0 3:7 0 - 1 1 3:11 - 0 1 1 9:11 1 0 - 1 9:13 1 - 0 1 10:11 1 0 1 - 12:13 1 1 0 - 1:3 0 0 x 1 1:8 x 0 0 1 8:9 1 0 0 x 8:10 1 0 x 0 8:12 1 x 0 0 3:7 0 x 1 1 3:11 x 0 1 1 9:11 1 0 x 1 9:13 1 x 0 1 10:11 1 0 1 x 12:13 1 1 0 x 1:8 x 0 0 1 3:11 x 0 1 1 8:12 1 x 0 0 3:7 0 x 1 1 9:13 1 x 0 1 9:11 1 0 x 1 8:10 1 0 x 0 1:3 0 0 x 1 10:11 1 0 1 x 12:13 1 1 0 x 8:9 1 0 0 x 1:8 x 0 0 1 3:11 x 0 1 1 8:12 1 x 0 0 3:7 0 x 1 1 9:13 1 x 0 1 9:11 1 0 x 1 8:10 1 0 x 0 1:3 0 0 x 1 10:7 1 0 1 x 12:13 1 1 0 x 8:9 1 0 0 x 1:8 x 0 0 1 3:11 x 0 1 1 1:8:3:11 x 0 x 1 Gruppe 1: 8:12 1 x 0 0 Gruppe 2: 9:13 1 x 0 1 3:7 0 x 1 1 8:12 1 x 1 1 8:12:9:13 1 x 0 x 9:11 1 0 x 1 8:10 1 0 x 0 1:3 0 0 x 1 9:11:8:10 1 0 x x 9:13:1:3 - 0 x 1 8:9 1 0 0 x 10:7 1 0 1 x 12:13 1 1 0 x 8:9:10:7 1 0 x x 8:9:12:13 1 x 0 x 1:8:3:11 x 0 x 1 8:12 1 x 1 1 8:12:9:13 1 x 0 x 9:11:8:10 1 0 x x 9:13:1:3 x 0 x 1 8:9:10:7 1 0 x x 8:9:12:13 1 x 0 xzwischenübung: minix
kernel, mm, fs, (h)
./kernel/proc.c
./kernel/main.c
./kernel/mpx88.s
./kernel/klib88.s
./kernel/memory.c
./kernel/stty.c
./kernel/floppy.c
./kernel/clock.c
./kernel/disk ?? wini...c
./h/glo.h
./h/const.h
./h/type.h
.. (proc.??nein)
ok:
virtual
physisch/physical/physikalisch
clicks
bytes
vir
phys
clicks
bytes
vir, phys, clicks, bytes
map
vir
phys
len
vir phys len
mem_map
mem_vir
mem_phys
mem_len
struct mem_map {
vir_clicks mem_vir;
phys_clicks mem_phys;
vir_clicks mem_len;
};
NR_REGS
NR_SEGS
11 REGS: ax bx dx cx sp bp si di cs ds ss
T: Text (Code): cs
D: Data: ds
S: Stack: ss
PIC 8259A: Programmable Interrupt Controller 8259A
Port: 0x20, 0x21, 0xA0, 0xA1 (0xa0, 0xa1):
0x20: Port
0x21: Mask
0xA0: Port
0xA1: Mask
X: Gift: 13: alt: wg. untere Nummer
X passt zu 13
XT: alter IBM PC XT
AT: neuer
AT: advanced...
#define XT_WINI_INT ?? 13
CLOCK: 8
KEYBOARD: 9
SYS_INT, ja
XT_WINI_INT
KEYBOARD_INT
CLOCK_INT
TTY_INT??
FLOPPY_INT...
trap divide interrupt
divide: abbildung auf den 0 vektor, eintrag in der interrupt vektortabelle, mit index 0 in der tabelle
trap: alle interrupts > 15, bedeutet: alle: die nicht am PIC 8259A sind
interrupt <= 15
suprise, trap, divide:
suprise: interrupt nicht erwartet
ok: botschaften:
sys_call: die einzigen system_calls die ausgetauscht werden sind:
SENDEN und EMPFANGEN, nachher in der
./kernel/proc.c?? nachher nachdenken
ok:
mini_send und mini_rec (interrupt und: sys_call)
in der
kernel.h?? oder proc.h <- zweiteres ist die
proc structure:
struct proc {
} procs [NR_TASKS+NR_PROCS];
darein kommt:
int p_regs [NR_REGS];
extern struct mem_map p_map [NR_SEGS];
usertime und systime
realtime time clocks ticks
jedenfalls:
usertime, system time vom prozess
vom aufgerufenen kind
stack pointer, anfang, grenze
int pid
process id;
..
also:
extern struct proc {
extern int p_regs [NR_REGS];
extern struct mem_map [NR_SEGS];
int pid;
// stackpointer, times...
} procs [NR_TASKS+NR_PROCS];
gut:
./kernel/main.c
grosse routine: main:
MM, FS, INIT
Der Kernel selber wird durch INIT eher repraesentiert, was weitere prozesse startet
TASKS: Betriebssystem
PROCS: User
schleife:
und: einsprungsaddressen:
keyboard_int, clock_int, floppy_int, disk_int
sys_call divide trap ....
erst: in der schleife die segmente:
T, D, S: anfang und laenge
und weitere...
dann interrupts initialisieren
set_vec (
set_vec (keyboard_int, ...)
ok:
mpx88.s:
klib88.s
mpx88.s
MINIX:
TTY_INT:
CLOCK_INT:
...
klib88.s:
hilfsroutinen:
dma_read
dma_write
lock
unlock
getchrome
video buffer copy...
proc.c:
mini_rec, mini_send, sys_call, interrupt
bei dem einen, werden processe gleich mit aufgebaut
bei dem anderen, nur die botschaften gesendet
diese sind caller, empfaenger und botschaft
dann kommen:
ready, unready, schedule...
ok... ich lerne heute mal auswendig, dann lerne ich das
spaeter weiter...
egal, wie vollstaendig, noch der ARM Cortex
ARM: Advanced Risc Machine
Advanced Risc Machine ldt.
ldt.: gmbh:
Linien:
A: Operating System, ... mit allem
R: Embedded System
M: Microcontroller
ARM Cortex-M7
ARM Cortex-A7
ARM Cortex-R7
ok: Dann Versionen:
zunaechst: ARM7TDMI ... what ever:
ARM: Architecture Application Level Reference Manual
TRM: technical Reference Manual
ARM, ARM, ARM
ISA: Immer: Instruction Set Architecture
ARM: Advanced Risc Machine
ARM: Architecture Application Level Reference Manual
ARM: Operating System, Embbeded, Microcontroller
Das sind Profiles
ok: Waynes?
ok:
Apple Computer, Arcorn und: VLSI Technology
VLSI: Very Large Scale Integration
VUSE: Very Ultra Super Extra
Small Medium Large
Memory Modell: x86: Tiny, Small, Medium, Compact, Large, Huge, Flat ...
Frequency: Low, Medium, High Frequency
Very High, Ultra High, Super High, Extra High
Very Large, Ultra Large...
ok: Very Large Scal Intergration Technology
Apple Computer, Arcorn und: VLSI Technology: ARM
STMicroelectronics: Atmel (heute)
dazu: PHILLIPS (PX...?)
OKI, ...
ARM Cortex-M7
ok: v4, v5, v6, v7
Thumb: daumen
bei dem prozessor:
Thumb-2: Erweiterter Befehlssatz: 32 Bit
Thumb-Instructions: 16 Bit...
ok:
Graph:
(auf Gut Deutsch: User und System)
User-Thread, Kernel...
ok: wie rein und raus:... gerade nicht praesent...
ok:
16 Register
13 GPR: General Purpose Register
r13 ... r0
Stack: Main Stack Pointer, Process Stack Pointer
Link Register: Ruecksprungaddresse
... noch was...
es gibt befehle, wie
ADD, ADC,
B: Branch, BC?? wie carry
flags sind generell: wie x86
sign, carry, overflow... (aehnlich)
atmega8 nebenbei gibt es ja noch neben
SIGN auch NEGATIVE ...
ok:
dann gibt es:
3 Formen der... Interrupts, oder wie:
jedenfalls generell:
NMI: Non Maskable Interrupts
Siehe: PIC 8259A, 0x21, 0xa1
Nested Vectored Interrupt
Verschachtetele Interrupt Routinen, oder der Vektor??
dann gibt es:
ABI: Application Binary Interface
EABI: Enhanced ABI
Advanced Periphal Bus
Advanced High Perphormance Bus
Advanced
Port, Bus:
Serial Wire: Seriell (V.24, RS232... z.B.)
JTAG: Joint Test Action Group
Debug Schnittstelle: JTAG...
Debug Port
JTAG Debug Port...
Es gibt mehrere Einheiten:
MMU: Memory Management Unit
MPU: Memory Protection Unit
LSU: Load and Store Unit
ALU: Arithmetic and Logic Unit
Power Management Unit
Neben, Neumann/harward...:
I/O, CPU und Mem:
Peripherals, auf dem IC, Debug Interface, what ever...
ok: pause, ich mache aufgaben weiter...
aufgaben:
(C) David Vajda Sun Aug 30 19:25:20 2026 4 Network - TTL - Disjunktive Normalform 0 0 0 0 0 0 1 0 0 0 1 1 2 0 0 1 0 0 3 0 0 1 1 1 4 0 1 0 0 0 5 0 1 0 1 0 6 0 1 1 0 0 7 0 1 1 1 1 8 1 0 0 0 1 9 1 0 0 1 1 10 1 0 1 0 1 11 1 0 1 1 1 12 1 1 0 0 1 13 1 1 0 1 1 14 1 1 1 0 0 15 1 1 1 1 0 (C) David Vajda Sun Aug 30 19:25:20 2026 4 Network - TTL - Disjunktive Normalform 1 0 0 0 1 1 3 0 0 1 1 1 7 0 1 1 1 1 8 1 0 0 0 1 9 1 0 0 1 1 10 1 0 1 0 1 11 1 0 1 1 1 12 1 1 0 0 1 13 1 1 0 1 1 Gruppe 1: 1 0 0 0 1 1 8 1 0 0 0 1 Gruppe 2: 3 0 0 1 1 1 9 1 0 0 1 1 10 1 0 1 0 1 12 1 1 0 0 1 Gruppe 3: 7 0 1 1 1 1 11 1 0 1 1 1 13 1 1 0 1 1 1:3 0 0 - 1 1:8 - 0 0 1 8:9 1 0 0 - 8:10 1 0 - 0 8:12 1 - 0 0 3:7 0 - 1 1 3:11 - 0 1 1 9:11 1 0 - 1 9:13 1 - 0 1 10:11 1 0 1 - 12:13 1 1 0 - 1:3 0 0 x 1 1:8 x 0 0 1 8:9 1 0 0 x 8:10 1 0 x 0 8:12 1 x 0 0 3:7 0 x 1 1 3:11 x 0 1 1 9:11 1 0 x 1 9:13 1 x 0 1 10:11 1 0 1 x 12:13 1 1 0 x 1:8 x 0 0 1 3:11 x 0 1 1 8:12 1 x 0 0 3:7 0 x 1 1 9:13 1 x 0 1 9:11 1 0 x 1 8:10 1 0 x 0 1:3 0 0 x 1 10:11 1 0 1 x 12:13 1 1 0 x 8:9 1 0 0 x 1:8 x 0 0 1 3:11 x 0 1 1 8:12 1 x 0 0 3:7 0 x 1 1 9:13 1 x 0 1 9:11 1 0 x 1 8:10 1 0 x 0 1:3 0 0 x 1 10:7 1 0 1 x 12:13 1 1 0 x 8:9 1 0 0 x 1:8 x 0 0 1 3:11 x 0 1 1 1:8:3:11 x 0 x 1 Gruppe 1: 8:12 1 x 0 0 Gruppe 2: 9:13 1 x 0 1 3:7 0 x 1 1 8:12 1 x 1 1 8:12:9:13 1 x 0 x 9:11 1 0 x 1 8:10 1 0 x 0 1:3 0 0 x 1 9:11:8:10 1 0 x x 9:13:1:3 - 0 x 1 8:9 1 0 0 x 10:7 1 0 1 x 12:13 1 1 0 x 8:9:10:7 1 0 x x 8:9:12:13 1 x 0 x 1:8:3:11 x 0 x 1 (hier ist was komisch) 8:12 1 x 1 1 8:12:9:13 1 x 0 x 9:11:8:10 1 0 x x 9:13:1:3 x 0 x 1 (hier ist was komisch), ok, es war eher das: 8:9:10:7 1 0 x x 8:9:12:13 1 x 0 x 9:13 1 x 0 1, ok, war rechtschreibfehler, gruppe (2 und 1) 9:13 und: 8:12, dann: selber ausdruck 1:8:3:11 x 0 x 1 8:12 1 x 1 1 8:12:9:13 1 x 0 x 9:11:8:10 1 0 x x 8:9:10:7 1 0 x x 8:9:12:13 1 x 0 x 1 0 0 0 1 1 3 0 0 1 1 1 7 0 1 1 1 1 8 1 0 0 0 1 9 1 0 0 1 1 10 1 0 1 0 1 11 1 0 1 1 1 12 1 1 0 0 1 13 1 1 0 1 1 1 3 7 8 9 10 11 12 13 1:8:3:11 1 1 1 1 8:12 1 1 8:12:9:13 1 1 1 1 9:11:8:10 1 1 1 1 8:9:10:7 1 1 1 1 8:9:12:13 1 1 1 1 ok, damit sind so oder so alle terme bedient und primimplikantentafel: 1 3 7 8 9 10 11 12 13 1:8:3:11 1 1 1 1 p 8:12 1 1 8:12:9:13 1 1 1 1 9:11:8:10 1 1 1 1 8:9:10:7 1 1 1 1 p 8:9:12:13 1 1 1 1 1 3 7 8 9 10 11 12 13 1:8:3:11 1 1 1 1 p 8:9:10:7 1 1 1 1 p 8:9:12:13 1 1 1 1 ok: 1:8:3:11 x 0 x 1 8:9:10:7 1 0 x x 8:9:12:13 1 x 0 x y = not x2 and not x0 or x3 and not x2 or x3 and not x1; in galasm aus zu druecken, uebung: device description module device description module device description module device description module GAL16V8 Module GAL16v808302026 ... pins - gleich uebung y = /x2 * /x0 x3 * /x2 x3 * /x1 Descriptions oder vergessen... ok: pins realitaet: VCC, GND, /OE, CLK Auf der einen Seite Input Auf der anderen Seite Output Im Westen: Input Im Osten: Output GND: Sued-West, wie immer VCC: Pin 20: Nord-Ost GND: Seite: Input VCC Seite Output CLK: ist auf Seite: Input /OE: auf Seite Output als CLK X3 X2 X1 X0 NC NC NC NC GND /OE Y NC NC NC NC NC NC NC VCC so zum beispiel und ich glaube das ist richtig... GAL16V8 Module GAL16v808302026 CLK X3 X2 X1 X0 NC NC NC NC GND /OE Y NC NC NC NC NC NC NC VCC y = /x2 * /x0 x3 * /x2 x3 * /x1 Description kann sein # ist oder oder so: GAL16V8 Module GAL16v808302026 CLK X3 X2 X1 X0 NC NC NC NC GND /OE Y NC NC NC NC NC NC NC VCC y = /x2 * /x0 # x3 * /x2 # x3 * /x1 Description ok, wenn wir das haben, geht es weiter... wir testen zunaechst mit eigenen mitteln, ist der ausdruck richtig, wir machen die tabelle in latex und wir machen auch ein timing diagramm.
| 0 | 0 | 0 | 0 | 0 | 0 |
| 0 | 0 | 0 | |||
| 0 | 0 | 0 | 0 | ||
| 0 | 0 | ||||
| 0 | 0 | 0 | 0 | ||
| 0 | 0 | 0 | |||
| 0 | 0 | 0 | |||
| 0 | |||||
| 0 | 0 | 0 | |||
| 0 | 0 | ||||
| 0 | 0 | ||||
| 0 | |||||
| 0 | 0 | ||||
| 0 | |||||
| 0 | 0 | ||||
| 0 |
so,
y = not x2 and not x0 or x3 and not x2 or x3 and not x1; testen auf not x2 and not x0... 0 0 0 0 0 0 1 0 0 0 1 1 2 0 0 1 0 0 3 0 0 1 1 1 4 0 1 0 0 0 5 0 1 0 1 0 6 0 1 1 0 0 7 0 1 1 1 1 8 1 0 0 0 1 9 1 0 0 1 1 10 1 0 1 0 1 11 1 0 1 1 1 12 1 1 0 0 1 13 1 1 0 1 1 14 1 1 1 0 1 15 1 1 1 1 1 ok: not x2 and not x0 0 0 0 0 0 0 1 1 1 1 0 0 0 1 1 1 2 0 0 1 0 0 1 1 1 3 0 0 1 1 1 1 4 0 1 0 0 0 1 5 0 1 0 1 0 6 0 1 1 0 0 1 7 0 1 1 1 1 8 1 0 0 0 1 1 1 1 9 1 0 0 1 1 1 10 1 0 1 0 1 1 1 1 11 1 0 1 1 1 1 12 1 1 0 0 1 1 13 1 1 0 1 1 14 1 1 1 0 1 1 15 1 1 1 1 1 0 0 0 0 0 0 1 1 1 2 0 0 1 0 0 1 1 1 8 1 0 0 0 1 1 1 1 10 1 0 1 0 1 1 1 1 x3 and not x2 or 0 0 0 0 0 0 1 1 0 0 0 1 1 1 2 0 0 1 0 0 1 3 0 0 1 1 1 1 4 0 1 0 0 0 5 0 1 0 1 0 6 0 1 1 0 0 7 0 1 1 1 1 8 1 0 0 0 1 1 1 9 1 0 0 1 1 1 1 10 1 0 1 0 1 1 1 11 1 0 1 1 1 1 1 12 1 1 0 0 1 1 13 1 1 0 1 1 1 14 1 1 1 0 1 1 15 1 1 1 1 1 1 0 0 0 0 0 0 1 1 0 0 0 1 1 1 2 0 0 1 0 0 1 3 0 0 1 1 1 1 4 0 1 0 0 0 5 0 1 0 1 0 6 0 1 1 0 0 7 0 1 1 1 1 8 1 0 0 0 1 1 1 9 1 0 0 1 1 1 1 10 1 0 1 0 1 1 1 11 1 0 1 1 1 1 1 12 1 1 0 0 1 1 13 1 1 0 1 1 1 14 1 1 1 0 1 1 15 1 1 1 1 1 1 x3 and not x1: 8 1 0 0 0 1 1 1 9 1 0 0 1 1 1 1 12 1 1 0 0 1 1 1 13 1 1 0 1 1 1 1