david vajda
(C) David Vajda Fri Oct 16 06:46:40 2026 4 Network - TTL - Disjunktive Normalform 0 0 0 0 0 0 1 0 0 0 1 0 2 0 0 1 0 1 3 0 0 1 1 1 4 0 1 0 0 0 5 0 1 0 1 1 6 0 1 1 0 1 7 0 1 1 1 0 8 1 0 0 0 0 9 1 0 0 1 1 10 1 0 1 0 0 11 1 0 1 1 0 12 1 1 0 0 1 13 1 1 0 1 0 14 1 1 1 0 0 15 1 1 1 1 1
| 0 | 0 | 0 | 0 | 0 | 0 |
| 0 | 0 | 0 | 0 | ||
| 0 | 0 | 0 | |||
| 0 | 0 | ||||
| 0 | 0 | 0 | 0 | ||
| 0 | 0 | ||||
| 0 | 0 | ||||
| 0 | 0 | ||||
| 0 | 0 | 0 | 0 | ||
| 0 | 0 | ||||
| 0 | 0 | 0 | |||
| 0 | 0 | ||||
| 0 | 0 | ||||
| 0 | 0 | ||||
| 0 | 0 | ||||
(C) David Vajda
Fri Oct 16 06:46:40 2026
4 Network - TTL - Disjunktive Normalform
2 0 0 1 0 1
3 0 0 1 1 1
5 0 1 0 1 1
6 0 1 1 0 1
9 1 0 0 1 1
12 1 1 0 0 1
15 1 1 1 1 1
Gruppe 1:
2 0 0 1 0 1
Gruppe 2:
3 0 0 1 1 1
5 0 1 0 1 1
6 0 1 1 0 1
9 1 0 0 1 1
12 1 1 0 0 1
Gruppe 4:
15 1 1 1 1 1
2,3 0 0 1 x
2,6 0 x 1 0
5 0 1 0 1
9 1 0 0 1
12 1 1 0 0
15 1 1 1 1
primimplikantetafel
2 3 5 6 9 12 15
2,3 H H
2,6 H H
5 H
9 H
12 H
15 H
eigentlich:
2 3 5 6 9 12 15
2,3 H H L L L L L
2,6 H L L H L L L
5 L L H L L L L
9 L L L L H L L
12 L L L L L H L
15 L L L L L L H
|
|
|||||||
2,3 0 0 1 x
2,6 0 x 1 0
5 0 1 0 1
9 1 0 0 1
12 1 1 0 0
15 1 1 1 1
y <= (not x3 and not x2 and x1) or
(not x3 and x2 and not x0) or
(not x3 and x2 and not x1 and x0) or
(x3 and not x2 and not x1 and x0) or
(x3 and x2 and not x1 and not x0) or
(x3 and x2 and x1 and x0);
ok und in
galasmtips for all users:
74xx, lattice gal16v8 ... CLK VCC X4 Y X3 NC X2 NC X1 NC X0 NC NC NC NC NC NC NC GND /OE 74/54/84xx A1 VCC B1 A3 C1 B3 A2 C3 B2 A4 C2 B4 GND C4 ok, in schreibweise galasm fuer lattice gal16v8 CLK X4 X3 X2 X1 X0 NC NC NC GND /OE Y NC NC NC NC NC NC NC VCCok, nun auf die schaltung angepasst, weil
GAL16V8
MODULE GAL16V8QUINDNF10152026
CLK X3 X2 X1 X0 NC NC NC NC GND
/OE Y NC NC NC NC NC NC NC VCC
y = /x3 * /x2 * x1 +
/x3 * x2 * /x0 +
/x3 * x2 * /x1 * x0 +
x3 * /x2 * /x1 * x0 +
x3 * x2 * /x1 * /x0 +
x3 * x2 * x1 * x0
DESCRIPTION
This is quine again.
ok, problem, wenige und gatter sind es diesmal leider nicht.
hier der plan:
\begin{circuitikz}
\node [and port] (and61) at (12,0) {$54ls08_1$};
\node [and port] (and62) at (10,0) {$54ls08_2$};
\node [and port] (and51) at (8,0) {$54ls08_3$};
\node [and port] (and52) at (6,0) {$54ls08_4$};
\node [and port] (and41) at (8,0) {$54ls08_1$};
\node [and port] (and42) at (6,0) {$54ls08_2$};
\node [and port] (and43) at (4,0) {$54ls08_3$};
\end{circuitikz}
nächste zeichnung, verteilt auf mehr pläne:
\begin{circuitikz}
\node [and port] (and31) at (0,18) {$54ls08_4$};
\node [and port] (and32) at (0,16) {$54ls08_1$};
\node [and port] (and33) at (0,14) {$54ls08_2$};
\node [and port] (and21) at (0,12) {$54ls08_3$};
\node [and port] (and22) at (0,10) {$54ls08_4$};
\node [and port] (and23) at (0,8) {$54ls08_1$};
\node [and port] (and11) at (0,6) {$54ls08_2$};
\node [and port] (and12) at (0,4) {$54ls08_3$};
\node [and port] (and13) at (0,2) {$54ls08_4$};
\end{circuitikz}
ok, sagen wir so, die sind in der mitte vertauscht: invertiert/nicht invertiert.
\begin{circuitikz}
\node [and port] (and31) at (0,18) {$54ls08_4$};
\node [and port] (and32) at (0,16) {$54ls08_1$};
\node [and port] (and33) at (0,14) {$54ls08_2$};
\draw (and32.out) -- (0.5,16) -- (0.5,17) -- (-2,17) -- (-2,17.7) -- (and31.in 2);
\draw (and33.out) -- (1.5,14) -- (1.5,19) -- (-2,19) -- (-2,18.25) -- (and31.in 1);
\node [and port] (and21) at (0,12) {$54ls08_3$};
\node [and port] (and22) at (0,10) {$54ls08_4$};
\node [and port] (and23) at (0,8) {$54ls08_1$};
\draw (and22.out) -- (0.5,10) -- (0.5,11) -- (-2,11) -- (-2,11.7) -- (and21.in 2);
\draw (and23.out) -- (1.5,8) -- (1.5,13) -- (-2,13) -- (-2,12.25) -- (and21.in 1);
\node [and port] (and11) at (0,6) {$54ls08_2$};
\node [and port] (and12) at (0,4) {$54ls08_3$};
\node [and port] (and13) at (0,2) {$54ls08_4$};
\draw (and12.out) -- (0.5,4) -- (0.5,5) -- (-2,5) -- (-2,5.7) -- (and11.in 2);
\draw (and13.out) -- (1.5,2) -- (1.5,7) -- (-2,7) -- (-2,6.25) -- (and11.in 1);
\node [not port, rotate=180] (not4) at (-3.8,21) {$54ls04_4$};
\node [not port, rotate=180] (not3) at (-2.8,18) {$54ls04_3$};
\node [not port, rotate=0] (not2) at (-6,21) {$54ls04_2$};
\node [not port, rotate=0] (not1) at (-7,18) {$54ls04_1$};
\draw (not4.out) -- (-4.5,0);
\draw (not3.out) -- (-3.5,0);
\draw (not2.out) -- (-5.25,0);
\draw (not1.out) -- (-6.25,0);
\draw (-4,20) -- (-4,0);
\draw (-5.75,20) -- (-5.75,0);
\draw (-3,20) -- (-3,0);
\draw (-6.75,17) -- (-6.75,0);
\draw (and12.in 1) -- (-6.75,4.25);
\draw (and12.in 2) -- (-3,3.75);
\draw (and13.in 1) -- (-5.75,2.25);
\draw (and13.in 2) -- (-4,1.75);
\draw (and22.in 1) -- (-6.75,10.25);
\draw (and22.in 2) -- (-3,9.75);
\draw (and23.in 1) -- (-5.75,8.25);
\draw (and23.in 2) -- (-4,7.75);
\end{circuitikz}
jetzt mit zwischenstufe nicht im gemeinsamen schaltplan - zwischenstufe?
stufe eher nicht - bus.
\begin{circuitikz}
\node [and port] (and31) at (0,18) {$54ls08_4$};
\node [and port] (and32) at (0,16) {$54ls08_1$};
\node [and port] (and33) at (0,14) {$54ls08_2$};
\draw (and32.out) -- (0.5,16) -- (0.5,17) -- (-2,17) -- (-2,17.7) -- (and31.in 2);
\draw (and33.out) -- (1.5,14) -- (1.5,19) -- (-2,19) -- (-2,18.25) -- (and31.in 1);
\node [and port] (and21) at (0,12) {$54ls08_3$};
\node [and port] (and22) at (0,10) {$54ls08_4$};
\node [and port] (and23) at (0,8) {$54ls08_1$};
\draw (and22.out) -- (0.5,10) -- (0.5,11) -- (-2,11) -- (-2,11.7) -- (and21.in 2);
\draw (and23.out) -- (1.5,8) -- (1.5,13) -- (-2,13) -- (-2,12.25) -- (and21.in 1);
\node [and port] (and11) at (0,6) {$54ls08_2$};
\node [and port] (and12) at (0,4) {$54ls08_3$};
\node [and port] (and13) at (0,2) {$54ls08_4$};
\draw (and12.out) -- (0.5,4) -- (0.5,5) -- (-2,5) -- (-2,5.7) -- (and11.in 2);
\draw (and13.out) -- (1.5,2) -- (1.5,7) -- (-2,7) -- (-2,6.25) -- (and11.in 1);
\node [not port, rotate=180] (not4) at (-3.8,21) {$54ls04_4$};
\node [not port, rotate=180] (not3) at (-2.8,18) {$54ls04_3$};
\node [not port, rotate=0] (not2) at (-6,21) {$54ls04_2$};
\node [not port, rotate=0] (not1) at (-7,18) {$54ls04_1$};
\draw (not4.out) -- (-4.5,0);
\draw (not3.out) -- (-3.5,0);
\draw (not2.out) -- (-5.25,0);
\draw (not1.out) -- (-6.25,0);
\draw (-4,20) -- (-4,0);
\draw (-5.75,20) -- (-5.75,0);
\draw (-3,20) -- (-3,0);
\draw (-4.9,20) -- (-4.9,0);
\draw (and12.in 1) -- (-4,4.25);
\draw (and12.in 2) -- (-3,3.75);
\draw (and13.in 1) -- (-5.75,2.25);
\draw (and13.in 2) -- (-4.9,1.75);
\draw (and22.in 1) -- (-4.5,10.25);
\draw (and22.in 2) -- (-3.5,9.75);
\draw (and23.in 1) -- (-5.75,8.25);
\draw (and23.in 2) -- (-4.9,7.75);
\draw (and32.in 1) -- (-4.5,16.25);
\draw (and32.in 2) -- (-3,15.75);
\draw (and33.in 1) -- (-5.75,14.25);
\draw (and33.in 2) -- (-5.25,13.75);
\node [or port] (or12) at (4,14) {$54LS32_1$};
\node [or port] (or11) at (4,12) {$54LS32_1$};
\draw (or11.out) -- (6,12) -- (6,13) -- (2,13) -- (2,13.75) -- (or12.in 2);
\draw (and31.out) -- (or12.in 1);
\draw (and21.out) -- (or11.in 1);
\draw (and11.out) -- (or11.in 2);
\end{circuitikz}
\begin{circuitikz}
\node [and port] (and31) at (0,18) {$54ls08_4$};
\node [and port] (and32) at (0,16) {$54ls08_1$};
\node [and port] (and33) at (0,14) {$54ls08_2$};
\draw (and32.out) -- (0.5,16) -- (0.5,17) -- (-2,17) -- (-2,17.7) -- (and31.in 2);
\draw (and33.out) -- (1.5,14) -- (1.5,19) -- (-2,19) -- (-2,18.25) -- (and31.in 1);
\node [and port] (and21) at (0,12) {$54ls08_3$};
\node [and port] (and22) at (0,10) {$54ls08_4$};
\node [and port] (and23) at (0,8) {$54ls08_1$};
\draw (and22.out) -- (0.5,10) -- (0.5,11) -- (-2,11) -- (-2,11.7) -- (and21.in 2);
\draw (and23.out) -- (1.5,8) -- (1.5,13) -- (-2,13) -- (-2,12.25) -- (and21.in 1);
\node [and port] (and11) at (0,6) {$54ls08_2$};
\node [and port] (and12) at (0,4) {$54ls08_3$};
\node [and port] (and13) at (0,2) {$54ls08_4$};
\draw (and12.out) -- (0.5,4) -- (0.5,5) -- (-2,5) -- (-2,5.7) -- (and11.in 2);
\draw (and13.out) -- (1.5,2) -- (1.5,7) -- (-2,7) -- (-2,6.25) -- (and11.in 1);
\node [not port, rotate=180] (not4) at (-3.8,21) {$54ls04_4$};
\node [not port, rotate=180] (not3) at (-2.8,18) {$54ls04_3$};
\node [not port, rotate=0] (not2) at (-6,21) {$54ls04_2$};
\node [not port, rotate=0] (not1) at (-7,18) {$54ls04_1$};
\draw (not4.out) -- (-4.5,0);
\draw (not3.out) -- (-3.5,0);
\draw (not2.out) -- (-5.25,0);
\draw (not1.out) -- (-6.25,0);
\draw (-4,20) -- (-4,0);
\draw (-5.75,20) -- (-5.75,0);
\draw (-3,20) -- (-3,0);
\draw (-4.9,20) -- (-4.9,0);
\draw (and12.in 1) -- (-4,4.25);
\draw (and12.in 2) -- (-3,3.75);
\draw (and13.in 1) -- (-5.75,2.25);
\draw (and13.in 2) -- (-4.9,1.75);
\draw (and22.in 1) -- (-4.5,10.25);
\draw (and22.in 2) -- (-3.5,9.75);
\draw (and23.in 1) -- (-5.75,8.25);
\draw (and23.in 2) -- (-4.9,7.75);
\draw (and32.in 1) -- (-4.5,16.25);
\draw (and32.in 2) -- (-3,15.75);
\draw (and33.in 1) -- (-5.75,14.25);
\draw (and33.in 2) -- (-5.25,13.75);
\node [or port] (or12) at (4,14) {$54LS32_1$};
\node [or port] (or11) at (4,12) {$54LS32_2$};
\draw (or11.out) -- (6,12) -- (6,13) -- (2,13) -- (2,13.75) -- (or12.in 2);
\draw (and31.out) -- (or12.in 1);
\draw (and21.out) -- (or11.in 1);
\draw (and11.out) -- (or11.in 2);
\node [or port] (or22) at (4,8) {$54LS32_1$};
\node [or port] (or21) at (4,10) {$54LS32_4$};
\draw (or22.out) -- (5,8) -- (5,9) -- (2,9) -- (2,9.75) -- (or21.in 2);
\node [or port] (or31) at (6,14) {$54LS32_3$};
\draw (or21.out) -- (or31.in 2);
\draw (or12.out) -- (or31.in 1);
\end{circuitikz}
jetzt kommt der andere, dann die not übernehme ich. blos: ich mache ja den automat.
der automat besteht unäre kodierung
python3generieren. die kodierung in 7 Segment und all united and others, will follow. wir machen zwei alternativen, mit python jeweils generierte Euletouren. pro graph und zwei, zunächst voneinander getrennt auf und abwärts zählbare - 4 Zustands Automaten. mit Shift Left und Shift right.
| Zustand | kodierung | eingabe | Folgezustand | kodierung | Ausgabe |
| 0 | |||||
| 0 | |||||
| 0 | |||||
| 0 | |||||
wie min-term und Max-Term gross, obwohl mathematik eher menge und
eher element, trotzdem, most significant 2 bit und lowest significant 2 bit
| Zustand | kodierung | eingabe | Folgezustand | kodierung | Ausgabe (
|
| 0 | |||||
| 0 | |||||
| 0 | |||||
| 0 | |||||
jetzt kommen die teilautomaten zum üben auch von mealy transform 2 moore und automaten zeichnen.
Lehrsatz: die ampel steht normalerweise auf rot, drückt man den knopf geht sie auf grün verbleibt dort für 2 sekunden und wechselt wieder auf rot
\begin{tikzpicture}
\node [circle, fill=green] (z01) at (0,0) {$z_1$};
\node [circle, fill=yellow] (z02) at (2,0) {$z_2$};
\node [circle, fill=red] (z03) at (0,2) {$z_3$};
\node [circle, fill=black] (z04) at (2,2) {\color{white}$z_4$};
\end{tikzpicture}