milsymb


\begin{tikzpicture}
\node[rectangle,inner sep=0pt,outer sep=0pt] (M0) at (0,0) {...
... (M1) -- (M2) -- (M3) -- (M4) -- (M5) -- (M6) -- (M7) -- (M8);
\end{tikzpicture}

nächstes:


\begin{tikzpicture}
\node[circle] (S0) at (0,0) {\begin{tikzpicture}\MilLand[fac...
...ed, fill=green, red] {}\end{tikzpicture}};
\draw (S0) -- (S1);
\end{tikzpicture}

\begin{tikzpicture}
\node[circle] (S0) at (0,0) {\begin{tikzpicture}\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\node[circle] (S1) at (4,4) {\begin{tikzpicture}\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\draw (S0) -- (S1);
\end{tikzpicture}
ok:


\begin{tikzpicture}[
roundnode/.style={circle, draw=green!60, fill=green!5, very...
...\node[squarednode] (rightsquare) [right=of maintopic] {3};
\par\end{tikzpicture}

\begin{tikzpicture}[
roundnode/.style={circle, draw=green!60, fill=green!5, very thick, minimum size=7mm},
squarednode/.style={rectangle, draw=red!60, fill=red!5, very thick, minimum size=5mm},
]
%Nodes
\node[squarednode]      (maintopic)                              {2};
\node[roundnode]        (uppercircle)       [above=of maintopic] {1};
\node[squarednode]      (rightsquare)       [right=of maintopic] {3};
\node[roundnode]
\end{tikzpicture}

es geht um die parameter in tikzpicture in eckigen klammern, hier laesst sich vielleicht ein milnode definieren, ueber Milland...

wobei ich kenne mich mit tikz noch nicht so gut aus, ich glaube ich habe eine alternative entdeckt, naemlich die. ich konnte Milland nicht in nodes unterbringen, ich glaube ich weiss jetzt aber wie es geht,

\begin{tikzpicture}[
roundnode/.style={circle, draw=green!60, fill=green!5, very thick, minimum size=7mm},
squarednode/.style={rectangle, draw=red!60, fill=red!5, very thick, minimum size=5mm},
]
%Nodes
\node[squarednode]      (maintopic)                              {2};
\node[roundnode]        (uppercircle)       [above=of maintopic] {1};
\node[squarednode]      (rightsquare)       [right=of maintopic] {3};
\node[roundnode]
es geht um die parameter in tikzpicture in eckigen klammern, hier laesst sich vielleicht ein milnode definieren, ueber Milland...
\begin{tikzpicture}[
roundnode/.style={circle, draw=green!60, fill=green!5, very...
.... controls +(down:7mm) and +(right:7mm) .. (lowercircle.east);
\end{tikzpicture}
\begin{tikzpicture}[
roundnode/.style={circle, draw=green!60, fill=green!5, very thick, minimum size=7mm},
squarednode/.style={rectangle, draw=red!60, fill=red!5, very thick, minimum size=5mm},
]
%Nodes
\node[squarednode]      (maintopic)                              {2};
\node[roundnode]        (uppercircle)       [above=of maintopic] {1};
\node[squarednode]      (rightsquare)       [right=of maintopic] {3};
\node[roundnode]        (lowercircle)       [below=of maintopic] {4};
%Lines
\draw[->] (uppercircle.south) -- (maintopic.north);
\draw[->] (maintopic.east) -- (rightsquare.west);
\draw[->] (rightsquare.south) .. controls +(down:7mm) and +(right:7mm) .. (lowercircle.east);
\end{tikzpicture}
https://www.overleaf.com/learn/latex/TikZ_package


\begin{tikzpicture}
\node[circle] (M0) at (0,0) {\begin{tikzpicture}[inner sep=0...
... (M1) -- (M2) -- (M3) -- (M4) -- (M5) -- (M6) -- (M7) -- (M8);
\end{tikzpicture}

\begin{tikzpicture}
\node[circle] (M0) at (0,0) {\begin{tikzpicture}[inner sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\node[circle] (M1) at (3,0) {\begin{tikzpicture}[inner sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\node[circle] (M2) at (6,0) {\begin{tikzpicture}[inner sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\node[circle] (M3) at (9,0) {\begin{tikzpicture}[inner sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\node[circle] (M4) at (12,0) {\begin{tikzpicture}[inner sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\node[circle] (M5) at (12,3) {\begin{tikzpicture}[inner sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\node[circle] (M6) at (9,3) {\begin{tikzpicture}[inner sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\node[circle] (M7) at (6,3) {\begin{tikzpicture}[inner sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\node[circle] (M8) at (3,3) {\begin{tikzpicture}[inner sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\draw (M0) -- (M1) -- (M2) -- (M3) -- (M4) -- (M5) -- (M6) -- (M7) -- (M8);
\end{tikzpicture}

ich glaube dass es doch besser ist Milland selbst zu benutzen, das erste ist: google ai sagt, dass es die Möglichkeit gibt, tikzpicture in tikzpicture rekursiv Inhalt werden zu lassen. das ist logisch, aber nicht ganz. ich bin darauf gekommen, ich wollte Milland als Inhalt fur den text knoten nehmen, das ging aber nicht, also habe ich tikzpicture genommen, so weit so gut. allerdings zeigte sich darauf hin: dass der abstand eben zu gross war, an den rändern, innerer äusserer und so weiter, rand ... ok: die loesung liegt erst mal bei inner sep in latex.

inner sep=0pt
fuer die tikzpicture Umgebung. fragt sich: wie ist es bei Milland selbst, hat das ein inner sep, was gibt es noch ausser inner sep?
\begin{tikzpicture}
\node[circle] (M0) at (0,0) {\begin{tikzpicture}[inner sep=0...
... (M1) -- (M2) -- (M3) -- (M4) -- (M5) -- (M6) -- (M7) -- (M8);
\end{tikzpicture}

\begin{tikzpicture}
\node[circle] (M0) at (0,0) {\begin{tikzpicture}[inner sep=0pt,outer sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red, inner sep=0pt,outer sep=0pt] {}\end{tikzpicture}};
\node[circle] (M1) at (3,0)  {\begin{tikzpicture}[inner sep=0pt,outer sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=red, red, inner sep=0pt,outer sep=0pt] {}\end{tikzpicture}};
\node[circle] (M2) at (6,0) {\begin{tikzpicture}[inner sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\node[circle] (M3) at (9,0) {\begin{tikzpicture}[inner sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\node[circle] (M4) at (12,0) {\begin{tikzpicture}[inner sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\node[circle] (M5) at (12,3) {\begin{tikzpicture}[inner sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\node[circle] (M6) at (9,3) {\begin{tikzpicture}[inner sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\node[circle] (M7) at (6,3) {\begin{tikzpicture}[inner sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\node[circle] (M8) at (3,3) {\begin{tikzpicture}[inner sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\draw (M0) -- (M1) -- (M2) -- (M3) -- (M4) -- (M5) -- (M6) -- (M7) -- (M8);
\end{tikzpicture}

padding und margin heisst das in html (css) und in latex: inner sep und outer sep. ok: ich hatte das schon html geübt, kann ich uebrigens auch weiter noch ueben. ok. in latex gibt es noch eine breite fuer den rand selber, das hier ja auch, weil es knoten, Rechtecke usw. sind, haben die eine dicke, jetzt einfach weiter was uebrigens noch verwertbar ist, ist bei Integralen stufenintegrale oder bei der abtastfrequenz exemplarisch, sehr gut, tikz...Achsenspezifische Abstände Wenn du den Abstand nicht in alle Richtungen gleichmäig verteilen willst, kannst du die X- und Y-Achse getrennt ansprechen:

ah ja, noch mehr Verbesserung ist wenn der knoten selber inner sep und outer sep hat. blos, jetzt überlege ich mir: ich habe ja kreise genommen, wenn ich einen kreis um eine route mache, gut, diese kann in den kreis vollstaendig auf dem rand eingeschlossen sein, blos Vierecke muessten noch besser? mal gucken?


\begin{tikzpicture}
\node[circle,inner sep=0pt,outer sep=0pt] (M0) at (0,0) {\be...
... (M1) -- (M2) -- (M3) -- (M4) -- (M5) -- (M6) -- (M7) -- (M8);
\end{tikzpicture}

\begin{tikzpicture}
\node[circle,inner sep=0pt,outer sep=0pt] (M0) at (0,0) {\begin{tikzpicture}[inner sep=0pt,outer sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red, inner sep=0pt,outer sep=0pt] {}\end{tikzpicture}};
\node[circle,inner sep=0pt,outer sep=0pt] (M1) at (3,0)  {\begin{tikzpicture}[inner sep=0pt,outer sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=red, red, inner sep=0pt,outer sep=0pt] {}\end{tikzpicture}};
\node[circle] (M2) at (6,0) {\begin{tikzpicture}[inner sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\node[circle] (M3) at (9,0) {\begin{tikzpicture}[inner sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\node[circle] (M4) at (12,0) {\begin{tikzpicture}[inner sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\node[circle] (M5) at (12,3) {\begin{tikzpicture}[inner sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\node[circle] (M6) at (9,3) {\begin{tikzpicture}[inner sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\node[circle] (M7) at (6,3) {\begin{tikzpicture}[inner sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\node[circle] (M8) at (3,3) {\begin{tikzpicture}[inner sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\draw (M0) -- (M1) -- (M2) -- (M3) -- (M4) -- (M5) -- (M6) -- (M7) -- (M8);
\end{tikzpicture}

ja, das laeuft ja, wie am Schnürchen, gesagt getan. jetzt geht es, noch besser geht es wirklich nicht! antwort lautet: rectangle nehmen, statt circle! dann perfekt! noch besser geht nicht!

und

tikzpicture
Umgebung in tikzpicture Umgebung

aber

reactangle
und ueber alle
inner sep = 0pt
\% und
outer sep = 0pt

\begin{tikzpicture}
\node[rectangle,inner sep=0pt,outer sep=0pt] (M0) at (0,0) {...
... (M1) -- (M2) -- (M3) -- (M4) -- (M5) -- (M6) -- (M7) -- (M8);
\end{tikzpicture}

\begin{tikzpicture}
\node[rectangle,inner sep=0pt,outer sep=0pt] (M0) at (0,0) {\begin{tikzpicture}[inner sep=0pt,outer sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red, inner sep=0pt,outer sep=0pt] {}\end{tikzpicture}};
\node[rectangle,inner sep=0pt,outer sep=0pt] (M1) at (3,0)  {\begin{tikzpicture}[inner sep=0pt,outer sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=red, red, inner sep=0pt,outer sep=0pt] {}\end{tikzpicture}};
\node[circle] (M2) at (6,0) {\begin{tikzpicture}[inner sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\node[circle] (M3) at (9,0) {\begin{tikzpicture}[inner sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\node[circle] (M4) at (12,0) {\begin{tikzpicture}[inner sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\node[circle] (M5) at (12,3) {\begin{tikzpicture}[inner sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\node[circle] (M6) at (9,3) {\begin{tikzpicture}[inner sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\node[circle] (M7) at (6,3) {\begin{tikzpicture}[inner sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\node[circle] (M8) at (3,3) {\begin{tikzpicture}[inner sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\draw (M0) -- (M1) -- (M2) -- (M3) -- (M4) -- (M5) -- (M6) -- (M7) -- (M8);
\end{tikzpicture}

ok, chemische Strukturformeln kann man so auch gleich ausprobieren, gut gezeichnete mathematische graphen und so weiter. indem man dann mal erst mit pentagrammen usw anfängt, versucht sie auf einem kreis. einen 5 ring (olan - ol) azolan und so weiter, zusammen mit angrenzenden 6er ringen - Azin z.B. sollte problemlos moeglich sein.

also, z.B. naechste aufgäbe mache ich so

ich nehme, etwas das ist wie chemie ringe (CH-Ringe)...allerdings:

ok, dann mache ich das so:

$\displaystyle 360^\circ$

entsprechen

$\displaystyle 2\cdot \pi$

im bogen mass und radius

$\displaystyle 2\cdot\pi\cdot r$

und dann

$\displaystyle 360^\circ$

durch 5 teilen. wenn ich das habe, dann mit

$\displaystyle sin(), cos(), x, y$

Koordinate jeweils ausrechnen, auf dem kreis einzeichnen auch fuer grössere

xagone

und rein machen...

$\displaystyle W$

ist nicht waerme sondern Arbeit.

und

$\displaystyle Q$

ist waerme, was ist die Enthalpie?

$\displaystyle E$

vielleicht?

was Whiskey Uniform - Ulrich –

Energie vielleicht wg. enthalte. Ulrich.

$\displaystyle U$

vergessen

Wir wissen Work ist die Arbeit. wie

$\displaystyle S$

und

$\displaystyle T$

. Ziel und quelle, kann s und d sein, aber s1, s2, bei Prozessoren, zwei quellen, machen wir s, t, d. und

$\displaystyle V$

ist alternative zu

$\displaystyle W$

. bei

$\displaystyle W$

die Arbeit

$\displaystyle -p*V = W$

$\displaystyle W$

ist Volumenarbeit entspricht aber jeder Arbeit

$\displaystyle W$

: Work.

und

$\displaystyle -p$

ist druck. das geht da drauf zurueck. druck

$\displaystyle 1 Bar = 101325$

10.13.25 p dass ein Vajda, mit Whisky, vorsichtig geht aber in beide Richtungen die volumen Arbeit, aber das nicht alles

  1. Wirtschaftssubjekt

    $\displaystyle A$

  2. Wirtschaftssubjekt

    $\displaystyle B$

  3. Hndler

    $\displaystyle A$

    , Haendler

    $\displaystyle B$

    , und deswegen bei anderen. OK

und dann Quebec. das ist waerme. bleiben tut der Ulrich bzw in der Uniform hat man innere Energie.

wenn ich aber

$\displaystyle U = Q - p\cdot V
$

weil:

$\displaystyle W = -p\cdot V$

kann ich

$\displaystyle U = -p\cdot V + Q
$

machen, weil die formel war umgestellt

Wir wissen Hndler

$\displaystyle A$

ist teufel, der knde ist Knig, der Verkufer ist, deswegen: Whiskey umdrehen! vorsicht tue ich nicht, muss man bei ihnen sagen: mir auch nicht

druck geht in beide Richtungen

einfacher Spruch:

Ulrich und Uniform: darin innere Energie

$\displaystyle Q$

in Quebec trage ich eine Uniform und trinke Whiskey

das kann man aber auswendig lernen, indem man das paukt

es gibt deutsche Buchstaben, dann sagen die Damen da oben ich plappere:

Anton Berta Caesar\dots. bitte nachgucken
Alpha Bravo Charlie \dots bitte nachgucken
pauken und trompeten ist immer besser, wie eselbsbruecken

W: Work Arbeit
P: Power Leistung
F: Force Kraft
E: Koennte man sagen: Energie und Enthalpie

V alternative zu W: ist Volumenarbeit

auch deswegen: Wegen Volumen wahrscheinlich

ein rohr in der chemie: mit einer Pumpe, bei dem auf den Kuchen tun, eine grssere Ampulle, zum raus machen...oder so.

kann man sich vorstellen: bei Destille, dass man das raus mit einem wie der Dampflok, ...

und hier bist sich Katz in schwanz:

$\displaystyle V$

und

$\displaystyle W$

. passiert oft. Eisenbahn und Ampulle

$\displaystyle \dfrac{360^/circ}{7}
$

[1.0, 0.3965056503747052, -0.6855665384418641, -0.9401676627747634, -0.05999704273768024, 0.8925893298722392, 0.7678304682546859]
[0.0, 0.9180322811431698, 0.7280099733992935, -0.34071214517923903, -0.9981985548290144, -0.45087058919187334, 0.6406530824243256]
[[1.0, 0.0], [0.3965056503747052, 0.9180322811431698], [-0.6855665384418641, 0.7280099733992935], [-0.9401676627747634, -0.34071214517923903], [-0.05999704273768024, -0.9981985548290144], [0.8925893298722392, -0.45087058919187334], [0.7678304682546859, 0.6406530824243256]]
[[2.0, 0.0], [0.7930113007494104, 1.8360645622863396], [-1.3711330768837282, 1.456019946798587], [-1.8803353255495268, -0.6814242903584781], [-0.11999408547536047, -1.9963971096580289], [1.7851786597444783, -0.9017411783837467], [1.5356609365093719, 1.2813061648486512]]
(0.0,2.0)
(1.836,0.793)
(1.456,-1.371)
(-0.681,-1.88)
(-1.996,-0.12)
(-0.902,1.785)
(1.281,1.536)
hier ist der code dazu:

## (c) david vajda
## 10/11/2026
## python 3, grad auf kreis teilen

import math

i=0
u=0
X7=[]
Y7=[]
d=360/7
while i < 7:
    X7.append (math.cos(u))
    Y7.append (math.sin(u))
    u = u + d
    i = i + 1

print (X7)
print (Y7)

## jetzt die version einen schritt
## die andere version, da sind beides gleich
## paare

## dann muss das alles mit radius
## 2 multipliziert.

k=[]
i=0
u=0
d=360/7
while i < 7:
    k.append ([math.cos(u),math.sin(u)])
    u = u + d
    i = i + 1

print (k)

## jetzt mit radius 2


k=[]
i=0
u=0
d=360/7
while i < 7:
    k.append ([2*math.cos(u),2*math.sin(u)])
    u = u + d
    i = i + 1

print (k)

# und dann mit latex faehigen ausdruck:

i=0
while i < 7:
    print (f"({round(k[i][1],3)},{round(k[i][0],3)})")
    i = i + 1

\begin{tikzpicture}
\node [circle] (A) at (0.0,2.0) {A};
\node [circle] (B) at (...
...t (-0.902,1.785) {F};
\node [circle] (G) at (1.281,1.536) {G};
\end{tikzpicture}


\begin{tikzpicture}
\node [circle] (A) at (2.0, 0.0) {A};
\node [circle] (B) at ...
...(1.785, -0.902) {F};
\node [circle] (G) at (1.536, 1.281) {G};
\end{tikzpicture}

## python 3
## (c) david vajda
## 10/12/2026
CIRCLE=((1,0),(0.309016994374947,0.951056516295154),(-0.809016994374947,0.587785252292473),(-0.809016994374947,-0.587785252292473),(0.309016994374947,-0.951056516295154))
i = 0
while i < 5:
	print (f"({round(CIRCLE[i][0]*2,3)},{round(CIRCLE[i][1]*2,3)})")
	i = i + 1

so da kommt raus:

(2,0)
(0.618,1.902)
(-1.618,1.176)
(-1.618,-1.176)
(0.618,-1.902)

$\displaystyle 360^\circ = 2\cdot \pi$

durch

$\displaystyle 5$

$\displaystyle \dfrac{360^\circ}{5} = \dfrac{300^\circ}{5} + \dfrac{60^\circ}{5} = 60^\circ+12^\circ = 72^\circ$

und nun rechnen wir

$\displaystyle (sin(x),\cos(x))$

für jeden punkt aus. der erste winkel ist:

$\displaystyle \alpha_n = \displaystyle\sum_{1}^{5} 72^\circ
$

$\displaystyle (0^\circ, 72^\circ, 144^\circ, (210^\circ+6^\circ) = 216^\circ,288^\circ)$

ok, und jetzt

$\displaystyle (\sin(\alpha_n),\cos(\alpha_n))$

\begin{displaymath}
\begin{array}{c}
((\sin(0^\circ,cos(0^\circ)),(\sin(72^\circ...
...,cos(216^\circ))),(\sin(288^\circ,cos(288^\circ))))
\end{array}\end{displaymath}

$\displaystyle (\sin(0^\circ),\sin(72^\circ),\sin(144^\circ),\sin(216^\circ),\sin(288^\circ))
$

$\displaystyle (cos(0^\circ),cos(72^\circ),cos(144^\circ),cos(216^\circ),cos(288^\circ))
$

\begin{displaymath}
\begin{array}{c}
((0,1),(0.951056516295154,0.309016994374947...
...6994374947),(-0.951056516295154,0.309016994374947))
\end{array}\end{displaymath}

ok, jetzt machen wir das so, wir kuerzen das etwas, und multiplizieren es mit 10

$\displaystyle ((0,10),(9.5,3.0),(5.8,-8),(-5.8,8.0),(-9.5,3.0))$

also, hier ist $x,y$ vertauscht. Horizontale/Vertikale. weil $1$ ist von Mittelpunkt nach Norden in der Senkrechte am Anfang. der Faktor 10 ist nicht optimal, besser $2 = r$

\begin{displaymath}
\begin{array}{c}
((1,0),(0.309016994374947,0.951056516295154...
...5252292473),(0.309016994374947,-0.951056516295154))
\end{array}\end{displaymath}

\begin{tikzpicture}
\node [circle] (A) at (10,0) {A};
\node [circle] (B) at (3.0,9.5) {B};
\node [circle] (C) at (-8,5.8) {C};
\node [circle] (D) at (8.0,-5.8) {D};
\node [circle] (E) at (3.0,-9.5) {E};
\end{tikzpicture}


\begin{tikzpicture}
\node [circle] (A) at (2,0) {A};
\node [circle] (B) at (0.61...
...(-1.618,-1.176) {D};
\node [circle] (E) at (0.618,-1.902) {E};
\end{tikzpicture}

## python 3
## (c) david vajda
## 10/12/2026

CIRCLE=((1,0),(0.309016994374947,0.951056516295154),(-0.809016994374947,0.587785252292473),(-0.809016994374947,-0.587785252292473),(0.309016994374947,-0.951056516295154))

i = 0
while i < 5:
	print (f"({round(CIRCLE[i][0]*2,3)},{round(CIRCLE[i][1]*2,3)})")
	i = i + 1

so die ausgabe lautet:

(2,0)
(0.618,1.902)
(-1.618,1.176)
(-1.618,-1.176)
(0.618,-1.902)

Image Screenshot_20261012_064109

Image Screenshot_20261012_064052

Image Screenshot_20261012_063954


\begin{tikzpicture}
\node [circle] (A) at (2,0) {A};
\node [circle] (B) at (0.61...
... -- (D);
\draw (B) -- (E);
\draw (B) -- (D);
\draw (C) -- (E);
\end{tikzpicture}

## python 3
## (c) david vajda
## 10/12/2026

CIRCLE=((1,0),(0.309016994374947,0.951056516295154),(-0.809016994374947,0.587785252292473),(-0.809016994374947,-0.587785252292473),(0.309016994374947,-0.951056516295154))

i = 0
while i < 5:
	print (f"({round(CIRCLE[i][0]*2,3)},{round(CIRCLE[i][1]*2,3)})")
	i = i + 1

(2,0)
(0.618,1.902)
(-1.618,1.176)
(-1.618,-1.176)
(0.618,-1.902)

## (c) david vajda
## python3 - "ubungsprogramm f"ur bahnstrecke
#### 09/19/2026

A = (1.23, 1.31, 1.14, 0.95, 2.39, 2.71, 3.26, 3.47, 3.72, 4.12, 4.39, 4.75)
B = (0.60, 1.48, 1.52, 2.10, 2.83, 2.68, 3.37, 3.65, 3.79, 4.14, 3.08, 1.77)

i = 0
while i < len (A):
    print (f"\\node [state] (Z{i}) at ({round(A[i]*2,2)},{round(B[i]*2,2)}) $Z_{i}$;\\\\")
    # print ("\\node [state] (Z", i, ") at (", round(A[i]*3,2 ), ",", round(B[i]*3,2), ") $Z_{i}$;\\\\")
    i = i+1

nächstes:

## (c) david vajda
## 10/11/2026
## python 3, grad auf kreis teilen

import math

i=0
u=0
X7=[]
Y7=[]
d=360/7
while i < 7:
    X7.append (math.cos(u))
    Y7.append (math.sin(u))
    u = u + d
    i = i + 1

print (X7)
print (Y7)

## jetzt die version einen schritt
## die andere version, da sind beides gleich
## paare

## dann muss das alles mit radius
## 2 multipliziert.

k=[]
i=0
u=0
d=360/7
while i < 7:
    k.append ([math.cos(u),math.sin(u)])
    u = u + d
    i = i + 1

print (k)

## jetzt mit radius 2


k=[]
i=0
u=0
d=360/7
while i < 7:
    k.append ([2*math.cos(u),2*math.sin(u)])
    u = u + d
    i = i + 1

print (k)

# und dann mit latex faehigen ausdruck:

i=0
while i < 7:
    print (f"({round(k[i][1],3)},{round(k[i][0],3)})")
    i = i + 1

nächstes:

[1.0, 0.3965056503747052, -0.6855665384418641, -0.9401676627747634, -0.05999704273768024, 0.8925893298722392, 0.7678304682546859]
[0.0, 0.9180322811431698, 0.7280099733992935, -0.34071214517923903, -0.9981985548290144, -0.45087058919187334, 0.6406530824243256]
[[1.0, 0.0], [0.3965056503747052, 0.9180322811431698], [-0.6855665384418641, 0.7280099733992935], [-0.9401676627747634, -0.34071214517923903], [-0.05999704273768024, -0.9981985548290144], [0.8925893298722392, -0.45087058919187334], [0.7678304682546859, 0.6406530824243256]]
[[2.0, 0.0], [0.7930113007494104, 1.8360645622863396], [-1.3711330768837282, 1.456019946798587], [-1.8803353255495268, -0.6814242903584781], [-0.11999408547536047, -1.9963971096580289], [1.7851786597444783, -0.9017411783837467], [1.5356609365093719, 1.2813061648486512]]
(0.0,2.0)
(1.836,0.793)
(1.456,-1.371)
(-0.681,-1.88)
(-1.996,-0.12)
(-0.902,1.785)
(1.281,1.536)

hier nächstes

## (c) david vajda
## 10/11/2026
## python 3, grad auf kreis teilen

import math

i=0
u=0
X7=[]
Y7=[]
d=360/7
while i < 7:
    X7.append (math.cos(u))
    Y7.append (math.sin(u))
    u = u + d
    i = i + 1

print (X7)
print (Y7)

## jetzt die version einen schritt
## die andere version, da sind beides gleich
## paare

## dann muss das alles mit radius
## 2 multipliziert.

k=[]
i=0
u=0
d=360/7
while i < 7:
    k.append ([math.cos(u),math.sin(u)])
    u = u + d
    i = i + 1

print (k)

## jetzt mit radius 2


k=[]
i=0
u=0
d=360/7
# print (d)
while i < 7:
    k.append ([2*math.cos(u),2*math.sin(u)])
    print (u)
    u = u + d
    i = i + 1

print (k)

# und dann mit latex faehigen ausdruck:

i=0
while i < 7:
    print (f"({round(k[i][1],3)},{round(k[i][0],3)})")
    i = i + 1

i=0
while i < 7:
    print (f"({round(k[i][0],3)},{round(k[i][1],3)})")
    i = i + 1

k=[]
i=0
u=0
d=360/7
# print (d)
while i < 7:
    k.append ([2*math.cos(u),2*math.sin(u),u])
    u = u + d
    i = i + 1

print (k)

# und dann mit latex faehigen ausdruck:

i=0
while i < 7:
    print (f"\\node ({i}) at ({round(k[i][0],3)},{round(k[i][1],3)}) { {round(k[i][2],3)} };")
    i = i + 1



k=[]
i=0
u=0
d=(2*3.14159265359)/7
# print (d)
while i < 7:
    k.append ([2*math.cos(u),2*math.sin(u),u])
    u = u + d
    i = i + 1

print (k)

# und dann mit latex faehigen ausdruck:

i=0
while i < 7:
    print (f"\\node ({i}) at ({round(k[i][0],3)},{round(k[i][1],3)}) { {round(k[i][2],3)} };")
    i = i + 1


\begin{tikzpicture}
\node (A) at (2.0,0.0) {A};
\node (B) at (0.793,1.836) {B};
...
...ode (F) at (1.785,-0.902) {F};
\node (G) at (1.536,1.281) {G};
\end{tikzpicture}
hier nächstes:
\begin{tikzpicture}
\node (0) at (2.0,0.0) {0};
\node (1) at (1.247,1.564) {0.89...
...t (-0.445,-1.95) {4.488};
\node (6) at (1.247,-1.564) {5.386};
\end{tikzpicture}

Image quine10052026

Image qune09092026

Image quine10052026B

Image ttlgatter10082026

Image ttl09052026

Image ttlgatter10082026b

## (c) david vajda
## python3 - "ubungsprogramm f"ur bahnstrecke
#### 09/19/2026

A = (1.23, 1.31, 1.14, 0.95, 2.39, 2.71, 3.26, 3.47, 3.72, 4.12, 4.39, 4.75)
B = (0.60, 1.48, 1.52, 2.10, 2.83, 2.68, 3.37, 3.65, 3.79, 4.14, 3.08, 1.77)

i = 0
while i < len (A):
    print (f"\\node [state] (Z{i}) at ({round(A[i]*2,2)},{round(B[i]*2,2)}) $Z_{i}$;\\\\")
    # print ("\\node [state] (Z", i, ") at (", round(A[i]*3,2 ), ",", round(B[i]*3,2), ") $Z_{i}$;\\\\")
    i = i+1

## python 3
## (c) david vajda
## 10/12/2026

CIRCLE=((1,0),(0.309016994374947,0.951056516295154),(-0.809016994374947,0.587785252292473),(-0.809016994374947,-0.587785252292473),(0.309016994374947,-0.951056516295154))

i = 0
while i < 5:
	print (f"({round(CIRCLE[i][0]*2,3)},{round(CIRCLE[i][1]*2,3)})")
	i = i + 1


\begin{tikzpicture}
\node (0) at (2.0,0.0) {0};
\node (1) at (1.247,1.564) {0.89...
...t (-0.445,-1.95) {4.488};
\node (6) at (1.247,-1.564) {5.386};
\end{tikzpicture}


\begin{tikzpicture}
\node (A1) at (0.0,1.429) {A1};
\node (A2) at (0.363,-1.382)...
...(A4) at (0.994,-1.026) {A4};
\node (A5) at (-1.222,0.74) {A5};
\end{tikzpicture}


\begin{tikzpicture}
\node (B1) at (0.0,2.8) {B1};
\node (B2) at (0.711,-2.708) {...
... (B4) at (1.949,-2.01) {B4};
\node (B5) at (-2.395,1.45) {B5};
\end{tikzpicture}

ok, das war nichts. dann teile ich jetzt die gerade selber. es waere gut, uebrigens, eine $x$ und $y$ wert zu addieren.

so bisher:

Python 3.11.2 (main, Apr 28 2025, 14:11:48) [GCC 12.2.0] on linux
Type "help", "copyright", "credits" or "license()" for more information.

================= RESTART: /home/david/graddivcircle10112026.py ================
[1.0, 0.3965056503747052, -0.6855665384418641, -0.9401676627747634, -0.05999704273768024, 0.8925893298722392, 0.7678304682546859]
[0.0, 0.9180322811431698, 0.7280099733992935, -0.34071214517923903, -0.9981985548290144, -0.45087058919187334, 0.6406530824243256]
[[1.0, 0.0], [0.3965056503747052, 0.9180322811431698], [-0.6855665384418641, 0.7280099733992935], [-0.9401676627747634, -0.34071214517923903], [-0.05999704273768024, -0.9981985548290144], [0.8925893298722392, -0.45087058919187334], [0.7678304682546859, 0.6406530824243256]]
[[2.0, 0.0], [0.7930113007494104, 1.8360645622863396], [-1.3711330768837282, 1.456019946798587], [-1.8803353255495268, -0.6814242903584781], [-0.11999408547536047, -1.9963971096580289], [1.7851786597444783, -0.9017411783837467], [1.5356609365093719, 1.2813061648486512]]
(0.0,2.0)
(1.836,0.793)
(1.456,-1.371)
(-0.681,-1.88)
(-1.996,-0.12)
(-0.902,1.785)
(1.281,1.536)
(0.0,1.429)
(0.363,-1.382)
(-0.701,1.244)
(0.994,-1.026)
(-1.222,0.74)

(0.0,2.8)
(0.711,-2.708)
(-1.375,2.439)
(1.949,-2.01)
(-2.395,1.45)


\begin{tikzpicture}
\node (0) at (2.0,0.0) {0};
\node (1) at (1.247,1.564) {0.89...
...t (-0.445,-1.95) {4.488};
\node (6) at (1.247,-1.564) {5.386};
\end{tikzpicture}


\begin{tikzpicture}
\node (A1) at (0.0,2.0) {A1};
\node (A2) at (0.508,-1.935) {...
...A4) at (1.392,-1.436) {A4};
\node (A5) at (-1.711,1.036) {A5};
\end{tikzpicture}


\begin{tikzpicture}
\node (B1) at (0.0,2.0) {B1};
\node (B2) at (-1.643,1.14) {B...
...4) at (-0.492,-1.939) {B4};
\node (B5) at (1.313,-1.509) {B5};
\end{tikzpicture}


\begin{tikzpicture}
\node (A1) at (0.0,1.429) {A1};
\node (A2) at (1.311,0.566) ...
...) at (-0.487,-1.343) {A4};
\node (A5) at (-1.426,-0.086) {A5};
\end{tikzpicture}


\begin{tikzpicture}
\node (B1) at (0.0,2.8) {B1};
\node (B2) at (2.57,1.11) {B2}...
...) at (-0.954,-2.632) {B4};
\node (B5) at (-2.795,-0.168) {B5};
\end{tikzpicture}

## (c) david vajda
## 10/11/2026
## python 3, grad auf kreis teilen

import math

i=0
u=0
X7=[]
Y7=[]
d=360/7
while i < 7:
    X7.append (math.cos(u))
    Y7.append (math.sin(u))
    u = u + d
    i = i + 1

print (X7)
print (Y7)

## jetzt die version einen schritt
## die andere version, da sind beides gleich
## paare

## dann muss das alles mit radius
## 2 multipliziert.

k=[]
i=0
u=0
d=360/7
while i < 7:
    k.append ([math.cos(u),math.sin(u)])
    u = u + d
    i = i + 1

print (k)

## jetzt mit radius 2


k=[]
i=0
u=0
d=360/7
while i < 7:
    k.append ([2*math.cos(u),2*math.sin(u)])
    u = u + d
    i = i + 1

print (k)

# und dann mit latex faehigen ausdruck:

i=0
while i < 7:
    print (f"({round(k[i][1],3)},{round(k[i][0],3)})")
    i = i + 1

## d=(360/7)*5*x = 360
## 360*7/5*x=360
## 7/5*x = 1
## x = 5/7
## also der radius ist im gegensatz zu zwei:
## ein 5/7 mal so gross oder 7/5??
## oder ersteres
## wahrscheinlich zweiteres, probieren wir es aus
## und machen dieselben ringe, aber:
## mit einem anderen radius.
## und nur 5 aber addiert.
## nur der radius eben anders.

l1=[]
l2=[]
i=0
u=0
d=360/5
while i < 5:
    l1.append ([5/7*2*math.cos(u),5/7*2*math.sin(u)])
    l2.append ([7/5*2*math.cos(u),7/5*2*math.sin(u)])
    u = u + d
    i = i + 1
i=0
while i < 5:
    print (f"({round(l1[i][1],3)},{round(l1[i][0],3)})")
    i = i + 1
print ()
i=0
while i < 5:
    print (f"({round(l2[i][1],3)},{round(l2[i][0],3)})")
    i = i + 1


l1=[]
l2=[]
i=0
u=0
d=360/7
while i < 5:
    l1.append ([2*math.cos(5/7*u),2*math.sin(5/7*u)])
    l2.append ([2*math.cos(7/5*u),2*math.sin(7/5*u)])
    u = u + d
    i = i + 1
i=0
while i < 5:
    print (f"({round(l1[i][1],3)},{round(l1[i][0],3)})")
    i = i + 1
print ()
i=0
while i < 5:
    print (f"({round(l2[i][1],3)},{round(l2[i][0],3)})")
    i = i + 1


l1=[]
l2=[]
i=0
u=0
d=360/7
while i < 5:
    l1.append ([5/7*2*math.cos(u),5/7*2*math.sin(u)])
    l2.append ([7/5*2*math.cos(u),7/5*2*math.sin(u)])
    u = u + d
    i = i + 1
i=0
while i < 5:
    print (f"({round(l1[i][1],3)},{round(l1[i][0],3)})")
    i = i + 1
print ()
i=0
while i < 5:
    print (f"({round(l2[i][1],3)},{round(l2[i][0],3)})")
    i = i + 1
to heute