nächstes:
\begin{tikzpicture}
\node[circle] (S0) at (0,0) {\begin{tikzpicture}\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\node[circle] (S1) at (4,4) {\begin{tikzpicture}\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\draw (S0) -- (S1);
\end{tikzpicture}
ok:
\begin{tikzpicture}[
roundnode/.style={circle, draw=green!60, fill=green!5, very thick, minimum size=7mm},
squarednode/.style={rectangle, draw=red!60, fill=red!5, very thick, minimum size=5mm},
]
%Nodes
\node[squarednode] (maintopic) {2};
\node[roundnode] (uppercircle) [above=of maintopic] {1};
\node[squarednode] (rightsquare) [right=of maintopic] {3};
\node[roundnode]
\end{tikzpicture}
es geht um die parameter in tikzpicture in eckigen klammern, hier laesst sich vielleicht ein milnode definieren, ueber Milland...
wobei ich kenne mich mit tikz noch nicht so gut aus, ich glaube ich habe eine alternative entdeckt, naemlich die. ich konnte Milland nicht in nodes unterbringen, ich glaube ich weiss jetzt aber wie es geht,
\begin{tikzpicture}[
roundnode/.style={circle, draw=green!60, fill=green!5, very thick, minimum size=7mm},
squarednode/.style={rectangle, draw=red!60, fill=red!5, very thick, minimum size=5mm},
]
%Nodes
\node[squarednode] (maintopic) {2};
\node[roundnode] (uppercircle) [above=of maintopic] {1};
\node[squarednode] (rightsquare) [right=of maintopic] {3};
\node[roundnode]
es geht um die parameter in tikzpicture in eckigen klammern, hier laesst sich vielleicht ein milnode definieren, ueber Milland...
\begin{tikzpicture}[
roundnode/.style={circle, draw=green!60, fill=green!5, very thick, minimum size=7mm},
squarednode/.style={rectangle, draw=red!60, fill=red!5, very thick, minimum size=5mm},
]
%Nodes
\node[squarednode] (maintopic) {2};
\node[roundnode] (uppercircle) [above=of maintopic] {1};
\node[squarednode] (rightsquare) [right=of maintopic] {3};
\node[roundnode] (lowercircle) [below=of maintopic] {4};
%Lines
\draw[->] (uppercircle.south) -- (maintopic.north);
\draw[->] (maintopic.east) -- (rightsquare.west);
\draw[->] (rightsquare.south) .. controls +(down:7mm) and +(right:7mm) .. (lowercircle.east);
\end{tikzpicture}
https://www.overleaf.com/learn/latex/TikZ_package
\begin{tikzpicture}
\node[circle] (M0) at (0,0) {\begin{tikzpicture}[inner sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\node[circle] (M1) at (3,0) {\begin{tikzpicture}[inner sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\node[circle] (M2) at (6,0) {\begin{tikzpicture}[inner sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\node[circle] (M3) at (9,0) {\begin{tikzpicture}[inner sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\node[circle] (M4) at (12,0) {\begin{tikzpicture}[inner sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\node[circle] (M5) at (12,3) {\begin{tikzpicture}[inner sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\node[circle] (M6) at (9,3) {\begin{tikzpicture}[inner sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\node[circle] (M7) at (6,3) {\begin{tikzpicture}[inner sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\node[circle] (M8) at (3,3) {\begin{tikzpicture}[inner sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\draw (M0) -- (M1) -- (M2) -- (M3) -- (M4) -- (M5) -- (M6) -- (M7) -- (M8);
\end{tikzpicture}
ich glaube dass es doch besser ist Milland selbst zu benutzen, das erste ist: google ai sagt, dass es die Möglichkeit gibt, tikzpicture in tikzpicture rekursiv Inhalt werden zu lassen. das ist logisch, aber nicht ganz. ich bin darauf gekommen, ich wollte Milland als Inhalt fur den text knoten nehmen, das ging aber nicht, also habe ich tikzpicture genommen, so weit so gut. allerdings zeigte sich darauf hin: dass der abstand eben zu gross war, an den rändern, innerer äusserer und so weiter, rand ... ok: die loesung liegt erst mal bei inner sep in latex.
inner sep=0ptfuer die tikzpicture Umgebung. fragt sich: wie ist es bei Milland selbst, hat das ein inner sep, was gibt es noch ausser inner sep?
\begin{tikzpicture}
\node[circle] (M0) at (0,0) {\begin{tikzpicture}[inner sep=0pt,outer sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red, inner sep=0pt,outer sep=0pt] {}\end{tikzpicture}};
\node[circle] (M1) at (3,0) {\begin{tikzpicture}[inner sep=0pt,outer sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=red, red, inner sep=0pt,outer sep=0pt] {}\end{tikzpicture}};
\node[circle] (M2) at (6,0) {\begin{tikzpicture}[inner sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\node[circle] (M3) at (9,0) {\begin{tikzpicture}[inner sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\node[circle] (M4) at (12,0) {\begin{tikzpicture}[inner sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\node[circle] (M5) at (12,3) {\begin{tikzpicture}[inner sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\node[circle] (M6) at (9,3) {\begin{tikzpicture}[inner sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\node[circle] (M7) at (6,3) {\begin{tikzpicture}[inner sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\node[circle] (M8) at (3,3) {\begin{tikzpicture}[inner sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\draw (M0) -- (M1) -- (M2) -- (M3) -- (M4) -- (M5) -- (M6) -- (M7) -- (M8);
\end{tikzpicture}
padding und margin heisst das in html (css) und in latex: inner sep und outer sep. ok: ich hatte das schon html geübt, kann ich uebrigens auch weiter noch ueben. ok. in latex gibt es noch eine breite fuer den rand selber, das hier ja auch, weil es knoten, Rechtecke usw. sind, haben die eine dicke, jetzt einfach weiter was uebrigens noch verwertbar ist, ist bei Integralen stufenintegrale oder bei der abtastfrequenz exemplarisch, sehr gut, tikz...Achsenspezifische Abstände Wenn du den Abstand nicht in alle Richtungen gleichmäig verteilen willst, kannst du die X- und Y-Achse getrennt ansprechen:
inner xsep / inner ysep
outer xsep / outer ysep
\begin{tikzpicture}
\node[circle,inner sep=0pt,outer sep=0pt] (M0) at (0,0) {\begin{tikzpicture}[inner sep=0pt,outer sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red, inner sep=0pt,outer sep=0pt] {}\end{tikzpicture}};
\node[circle,inner sep=0pt,outer sep=0pt] (M1) at (3,0) {\begin{tikzpicture}[inner sep=0pt,outer sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=red, red, inner sep=0pt,outer sep=0pt] {}\end{tikzpicture}};
\node[circle] (M2) at (6,0) {\begin{tikzpicture}[inner sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\node[circle] (M3) at (9,0) {\begin{tikzpicture}[inner sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\node[circle] (M4) at (12,0) {\begin{tikzpicture}[inner sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\node[circle] (M5) at (12,3) {\begin{tikzpicture}[inner sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\node[circle] (M6) at (9,3) {\begin{tikzpicture}[inner sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\node[circle] (M7) at (6,3) {\begin{tikzpicture}[inner sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\node[circle] (M8) at (3,3) {\begin{tikzpicture}[inner sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\draw (M0) -- (M1) -- (M2) -- (M3) -- (M4) -- (M5) -- (M6) -- (M7) -- (M8);
\end{tikzpicture}
ja, das laeuft ja, wie am Schnürchen, gesagt getan. jetzt geht es, noch besser geht es wirklich nicht! antwort lautet: rectangle nehmen, statt circle! dann perfekt! noch besser geht nicht!
und
tikzpictureUmgebung in tikzpicture Umgebung
aber
reactangleund ueber alle
inner sep = 0pt \% und outer sep = 0pt
\begin{tikzpicture}
\node[rectangle,inner sep=0pt,outer sep=0pt] (M0) at (0,0) {\begin{tikzpicture}[inner sep=0pt,outer sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red, inner sep=0pt,outer sep=0pt] {}\end{tikzpicture}};
\node[rectangle,inner sep=0pt,outer sep=0pt] (M1) at (3,0) {\begin{tikzpicture}[inner sep=0pt,outer sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=red, red, inner sep=0pt,outer sep=0pt] {}\end{tikzpicture}};
\node[circle] (M2) at (6,0) {\begin{tikzpicture}[inner sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\node[circle] (M3) at (9,0) {\begin{tikzpicture}[inner sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\node[circle] (M4) at (12,0) {\begin{tikzpicture}[inner sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\node[circle] (M5) at (12,3) {\begin{tikzpicture}[inner sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\node[circle] (M6) at (9,3) {\begin{tikzpicture}[inner sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\node[circle] (M7) at (6,3) {\begin{tikzpicture}[inner sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\node[circle] (M8) at (3,3) {\begin{tikzpicture}[inner sep=0pt]\MilLand[faction=hostile, echelon=division, main=armoured, fill=green, red] {}\end{tikzpicture}};
\draw (M0) -- (M1) -- (M2) -- (M3) -- (M4) -- (M5) -- (M6) -- (M7) -- (M8);
\end{tikzpicture}
ok, chemische Strukturformeln kann man so auch gleich ausprobieren, gut gezeichnete mathematische graphen und so weiter. indem man dann mal erst mit pentagrammen usw anfängt, versucht sie auf einem kreis. einen 5 ring (olan - ol) azolan und so weiter, zusammen mit angrenzenden 6er ringen - Azin z.B. sollte problemlos moeglich sein.
also, z.B. naechste aufgäbe mache ich so
ich nehme, etwas das ist wie chemie ringe (CH-Ringe)...allerdings:
xagone
und rein machen...
was Whiskey Uniform - Ulrich –
Energie vielleicht wg. enthalte. Ulrich.
Wir wissen Work ist die Arbeit. wie
und
und dann Quebec. das ist waerme. bleiben tut der Ulrich bzw in der Uniform hat man innere Energie.
wenn ich aber
Wir wissen Hndler
druck geht in beide Richtungen
einfacher Spruch:
Ulrich und Uniform: darin innere Energie
das kann man aber auswendig lernen, indem man das paukt
es gibt deutsche Buchstaben, dann sagen die Damen da oben ich plappere:
Anton Berta Caesar\dots. bitte nachgucken Alpha Bravo Charlie \dots bitte nachguckenpauken und trompeten ist immer besser, wie eselbsbruecken
W: Work Arbeit P: Power Leistung F: Force KraftE: Koennte man sagen: Energie und Enthalpie
V alternative zu W: ist Volumenarbeit
auch deswegen: Wegen Volumen wahrscheinlich
ein rohr in der chemie: mit einer Pumpe, bei dem auf den Kuchen tun, eine grssere Ampulle, zum raus machen...oder so.
kann man sich vorstellen: bei Destille, dass man das raus mit einem wie der Dampflok, ...
und hier bist sich Katz in schwanz:
[1.0, 0.3965056503747052, -0.6855665384418641, -0.9401676627747634, -0.05999704273768024, 0.8925893298722392, 0.7678304682546859] [0.0, 0.9180322811431698, 0.7280099733992935, -0.34071214517923903, -0.9981985548290144, -0.45087058919187334, 0.6406530824243256] [[1.0, 0.0], [0.3965056503747052, 0.9180322811431698], [-0.6855665384418641, 0.7280099733992935], [-0.9401676627747634, -0.34071214517923903], [-0.05999704273768024, -0.9981985548290144], [0.8925893298722392, -0.45087058919187334], [0.7678304682546859, 0.6406530824243256]] [[2.0, 0.0], [0.7930113007494104, 1.8360645622863396], [-1.3711330768837282, 1.456019946798587], [-1.8803353255495268, -0.6814242903584781], [-0.11999408547536047, -1.9963971096580289], [1.7851786597444783, -0.9017411783837467], [1.5356609365093719, 1.2813061648486512]] (0.0,2.0) (1.836,0.793) (1.456,-1.371) (-0.681,-1.88) (-1.996,-0.12) (-0.902,1.785) (1.281,1.536)hier ist der code dazu:
## (c) david vajda
## 10/11/2026
## python 3, grad auf kreis teilen
import math
i=0
u=0
X7=[]
Y7=[]
d=360/7
while i < 7:
X7.append (math.cos(u))
Y7.append (math.sin(u))
u = u + d
i = i + 1
print (X7)
print (Y7)
## jetzt die version einen schritt
## die andere version, da sind beides gleich
## paare
## dann muss das alles mit radius
## 2 multipliziert.
k=[]
i=0
u=0
d=360/7
while i < 7:
k.append ([math.cos(u),math.sin(u)])
u = u + d
i = i + 1
print (k)
## jetzt mit radius 2
k=[]
i=0
u=0
d=360/7
while i < 7:
k.append ([2*math.cos(u),2*math.sin(u)])
u = u + d
i = i + 1
print (k)
# und dann mit latex faehigen ausdruck:
i=0
while i < 7:
print (f"({round(k[i][1],3)},{round(k[i][0],3)})")
i = i + 1
## python 3
## (c) david vajda
## 10/12/2026
CIRCLE=((1,0),(0.309016994374947,0.951056516295154),(-0.809016994374947,0.587785252292473),(-0.809016994374947,-0.587785252292473),(0.309016994374947,-0.951056516295154))
i = 0
while i < 5:
print (f"({round(CIRCLE[i][0]*2,3)},{round(CIRCLE[i][1]*2,3)})")
i = i + 1
so da kommt raus:
(2,0) (0.618,1.902) (-1.618,1.176) (-1.618,-1.176) (0.618,-1.902)
und nun rechnen wir
für jeden punkt aus. der erste winkel ist:
ok, und jetzt
ok, jetzt machen wir das so, wir kuerzen das etwas, und multiplizieren es mit 10
also, hier ist vertauscht. Horizontale/Vertikale. weil
ist von Mittelpunkt nach Norden in der Senkrechte
am Anfang. der Faktor 10 ist nicht optimal, besser
\begin{tikzpicture}
\node [circle] (A) at (10,0) {A};
\node [circle] (B) at (3.0,9.5) {B};
\node [circle] (C) at (-8,5.8) {C};
\node [circle] (D) at (8.0,-5.8) {D};
\node [circle] (E) at (3.0,-9.5) {E};
\end{tikzpicture}
## python 3
## (c) david vajda
## 10/12/2026
CIRCLE=((1,0),(0.309016994374947,0.951056516295154),(-0.809016994374947,0.587785252292473),(-0.809016994374947,-0.587785252292473),(0.309016994374947,-0.951056516295154))
i = 0
while i < 5:
print (f"({round(CIRCLE[i][0]*2,3)},{round(CIRCLE[i][1]*2,3)})")
i = i + 1
so die ausgabe lautet:
(2,0) (0.618,1.902) (-1.618,1.176) (-1.618,-1.176) (0.618,-1.902)
## python 3
## (c) david vajda
## 10/12/2026
CIRCLE=((1,0),(0.309016994374947,0.951056516295154),(-0.809016994374947,0.587785252292473),(-0.809016994374947,-0.587785252292473),(0.309016994374947,-0.951056516295154))
i = 0
while i < 5:
print (f"({round(CIRCLE[i][0]*2,3)},{round(CIRCLE[i][1]*2,3)})")
i = i + 1
(2,0) (0.618,1.902) (-1.618,1.176) (-1.618,-1.176) (0.618,-1.902)
## (c) david vajda
## python3 - "ubungsprogramm f"ur bahnstrecke
#### 09/19/2026
A = (1.23, 1.31, 1.14, 0.95, 2.39, 2.71, 3.26, 3.47, 3.72, 4.12, 4.39, 4.75)
B = (0.60, 1.48, 1.52, 2.10, 2.83, 2.68, 3.37, 3.65, 3.79, 4.14, 3.08, 1.77)
i = 0
while i < len (A):
print (f"\\node [state] (Z{i}) at ({round(A[i]*2,2)},{round(B[i]*2,2)}) $Z_{i}$;\\\\")
# print ("\\node [state] (Z", i, ") at (", round(A[i]*3,2 ), ",", round(B[i]*3,2), ") $Z_{i}$;\\\\")
i = i+1
nächstes:
## (c) david vajda
## 10/11/2026
## python 3, grad auf kreis teilen
import math
i=0
u=0
X7=[]
Y7=[]
d=360/7
while i < 7:
X7.append (math.cos(u))
Y7.append (math.sin(u))
u = u + d
i = i + 1
print (X7)
print (Y7)
## jetzt die version einen schritt
## die andere version, da sind beides gleich
## paare
## dann muss das alles mit radius
## 2 multipliziert.
k=[]
i=0
u=0
d=360/7
while i < 7:
k.append ([math.cos(u),math.sin(u)])
u = u + d
i = i + 1
print (k)
## jetzt mit radius 2
k=[]
i=0
u=0
d=360/7
while i < 7:
k.append ([2*math.cos(u),2*math.sin(u)])
u = u + d
i = i + 1
print (k)
# und dann mit latex faehigen ausdruck:
i=0
while i < 7:
print (f"({round(k[i][1],3)},{round(k[i][0],3)})")
i = i + 1
nächstes:
[1.0, 0.3965056503747052, -0.6855665384418641, -0.9401676627747634, -0.05999704273768024, 0.8925893298722392, 0.7678304682546859] [0.0, 0.9180322811431698, 0.7280099733992935, -0.34071214517923903, -0.9981985548290144, -0.45087058919187334, 0.6406530824243256] [[1.0, 0.0], [0.3965056503747052, 0.9180322811431698], [-0.6855665384418641, 0.7280099733992935], [-0.9401676627747634, -0.34071214517923903], [-0.05999704273768024, -0.9981985548290144], [0.8925893298722392, -0.45087058919187334], [0.7678304682546859, 0.6406530824243256]] [[2.0, 0.0], [0.7930113007494104, 1.8360645622863396], [-1.3711330768837282, 1.456019946798587], [-1.8803353255495268, -0.6814242903584781], [-0.11999408547536047, -1.9963971096580289], [1.7851786597444783, -0.9017411783837467], [1.5356609365093719, 1.2813061648486512]] (0.0,2.0) (1.836,0.793) (1.456,-1.371) (-0.681,-1.88) (-1.996,-0.12) (-0.902,1.785) (1.281,1.536)
hier nächstes
## (c) david vajda
## 10/11/2026
## python 3, grad auf kreis teilen
import math
i=0
u=0
X7=[]
Y7=[]
d=360/7
while i < 7:
X7.append (math.cos(u))
Y7.append (math.sin(u))
u = u + d
i = i + 1
print (X7)
print (Y7)
## jetzt die version einen schritt
## die andere version, da sind beides gleich
## paare
## dann muss das alles mit radius
## 2 multipliziert.
k=[]
i=0
u=0
d=360/7
while i < 7:
k.append ([math.cos(u),math.sin(u)])
u = u + d
i = i + 1
print (k)
## jetzt mit radius 2
k=[]
i=0
u=0
d=360/7
# print (d)
while i < 7:
k.append ([2*math.cos(u),2*math.sin(u)])
print (u)
u = u + d
i = i + 1
print (k)
# und dann mit latex faehigen ausdruck:
i=0
while i < 7:
print (f"({round(k[i][1],3)},{round(k[i][0],3)})")
i = i + 1
i=0
while i < 7:
print (f"({round(k[i][0],3)},{round(k[i][1],3)})")
i = i + 1
k=[]
i=0
u=0
d=360/7
# print (d)
while i < 7:
k.append ([2*math.cos(u),2*math.sin(u),u])
u = u + d
i = i + 1
print (k)
# und dann mit latex faehigen ausdruck:
i=0
while i < 7:
print (f"\\node ({i}) at ({round(k[i][0],3)},{round(k[i][1],3)}) { {round(k[i][2],3)} };")
i = i + 1
k=[]
i=0
u=0
d=(2*3.14159265359)/7
# print (d)
while i < 7:
k.append ([2*math.cos(u),2*math.sin(u),u])
u = u + d
i = i + 1
print (k)
# und dann mit latex faehigen ausdruck:
i=0
while i < 7:
print (f"\\node ({i}) at ({round(k[i][0],3)},{round(k[i][1],3)}) { {round(k[i][2],3)} };")
i = i + 1
hier nächstes:
## (c) david vajda
## python3 - "ubungsprogramm f"ur bahnstrecke
#### 09/19/2026
A = (1.23, 1.31, 1.14, 0.95, 2.39, 2.71, 3.26, 3.47, 3.72, 4.12, 4.39, 4.75)
B = (0.60, 1.48, 1.52, 2.10, 2.83, 2.68, 3.37, 3.65, 3.79, 4.14, 3.08, 1.77)
i = 0
while i < len (A):
print (f"\\node [state] (Z{i}) at ({round(A[i]*2,2)},{round(B[i]*2,2)}) $Z_{i}$;\\\\")
# print ("\\node [state] (Z", i, ") at (", round(A[i]*3,2 ), ",", round(B[i]*3,2), ") $Z_{i}$;\\\\")
i = i+1
## python 3
## (c) david vajda
## 10/12/2026
CIRCLE=((1,0),(0.309016994374947,0.951056516295154),(-0.809016994374947,0.587785252292473),(-0.809016994374947,-0.587785252292473),(0.309016994374947,-0.951056516295154))
i = 0
while i < 5:
print (f"({round(CIRCLE[i][0]*2,3)},{round(CIRCLE[i][1]*2,3)})")
i = i + 1
ok, das war nichts. dann teile ich jetzt die gerade selber. es waere gut, uebrigens, eine
und
wert zu addieren.
so bisher:
Python 3.11.2 (main, Apr 28 2025, 14:11:48) [GCC 12.2.0] on linux Type "help", "copyright", "credits" or "license()" for more information. ================= RESTART: /home/david/graddivcircle10112026.py ================ [1.0, 0.3965056503747052, -0.6855665384418641, -0.9401676627747634, -0.05999704273768024, 0.8925893298722392, 0.7678304682546859] [0.0, 0.9180322811431698, 0.7280099733992935, -0.34071214517923903, -0.9981985548290144, -0.45087058919187334, 0.6406530824243256] [[1.0, 0.0], [0.3965056503747052, 0.9180322811431698], [-0.6855665384418641, 0.7280099733992935], [-0.9401676627747634, -0.34071214517923903], [-0.05999704273768024, -0.9981985548290144], [0.8925893298722392, -0.45087058919187334], [0.7678304682546859, 0.6406530824243256]] [[2.0, 0.0], [0.7930113007494104, 1.8360645622863396], [-1.3711330768837282, 1.456019946798587], [-1.8803353255495268, -0.6814242903584781], [-0.11999408547536047, -1.9963971096580289], [1.7851786597444783, -0.9017411783837467], [1.5356609365093719, 1.2813061648486512]] (0.0,2.0) (1.836,0.793) (1.456,-1.371) (-0.681,-1.88) (-1.996,-0.12) (-0.902,1.785) (1.281,1.536) (0.0,1.429) (0.363,-1.382) (-0.701,1.244) (0.994,-1.026) (-1.222,0.74) (0.0,2.8) (0.711,-2.708) (-1.375,2.439) (1.949,-2.01) (-2.395,1.45)
## (c) david vajda
## 10/11/2026
## python 3, grad auf kreis teilen
import math
i=0
u=0
X7=[]
Y7=[]
d=360/7
while i < 7:
X7.append (math.cos(u))
Y7.append (math.sin(u))
u = u + d
i = i + 1
print (X7)
print (Y7)
## jetzt die version einen schritt
## die andere version, da sind beides gleich
## paare
## dann muss das alles mit radius
## 2 multipliziert.
k=[]
i=0
u=0
d=360/7
while i < 7:
k.append ([math.cos(u),math.sin(u)])
u = u + d
i = i + 1
print (k)
## jetzt mit radius 2
k=[]
i=0
u=0
d=360/7
while i < 7:
k.append ([2*math.cos(u),2*math.sin(u)])
u = u + d
i = i + 1
print (k)
# und dann mit latex faehigen ausdruck:
i=0
while i < 7:
print (f"({round(k[i][1],3)},{round(k[i][0],3)})")
i = i + 1
## d=(360/7)*5*x = 360
## 360*7/5*x=360
## 7/5*x = 1
## x = 5/7
## also der radius ist im gegensatz zu zwei:
## ein 5/7 mal so gross oder 7/5??
## oder ersteres
## wahrscheinlich zweiteres, probieren wir es aus
## und machen dieselben ringe, aber:
## mit einem anderen radius.
## und nur 5 aber addiert.
## nur der radius eben anders.
l1=[]
l2=[]
i=0
u=0
d=360/5
while i < 5:
l1.append ([5/7*2*math.cos(u),5/7*2*math.sin(u)])
l2.append ([7/5*2*math.cos(u),7/5*2*math.sin(u)])
u = u + d
i = i + 1
i=0
while i < 5:
print (f"({round(l1[i][1],3)},{round(l1[i][0],3)})")
i = i + 1
print ()
i=0
while i < 5:
print (f"({round(l2[i][1],3)},{round(l2[i][0],3)})")
i = i + 1
l1=[]
l2=[]
i=0
u=0
d=360/7
while i < 5:
l1.append ([2*math.cos(5/7*u),2*math.sin(5/7*u)])
l2.append ([2*math.cos(7/5*u),2*math.sin(7/5*u)])
u = u + d
i = i + 1
i=0
while i < 5:
print (f"({round(l1[i][1],3)},{round(l1[i][0],3)})")
i = i + 1
print ()
i=0
while i < 5:
print (f"({round(l2[i][1],3)},{round(l2[i][0],3)})")
i = i + 1
l1=[]
l2=[]
i=0
u=0
d=360/7
while i < 5:
l1.append ([5/7*2*math.cos(u),5/7*2*math.sin(u)])
l2.append ([7/5*2*math.cos(u),7/5*2*math.sin(u)])
u = u + d
i = i + 1
i=0
while i < 5:
print (f"({round(l1[i][1],3)},{round(l1[i][0],3)})")
i = i + 1
print ()
i=0
while i < 5:
print (f"({round(l2[i][1],3)},{round(l2[i][0],3)})")
i = i + 1
to heute